Frequently Asked Questions. Ask away! 🙋🏽
Q01.
What type of fuel is recommended?
To extend the life of your engine, the manufacturers recommend premium high octane gasoline
Q03.
What is the bevel siding attachment?
It’s an attachment that allows you to cut lapped siding.
Q05.
What type of chain does the slabber take?
Typically, the 404 Ripper Skip Tooth Chain.
Q07.
What accessories are available? (versatility for the user)
Log Dogs, Peavey Cant Hook, Inserted Blade, Rail Extensions, Pull Handle, Push Handle, Powered Vertical Set Works, Horizontal Chain Drive
Q09.
How do I move the mill?
The mill comes with a two wheel transporter. It’s designed for short distance around the site. The transporter is also used to place the mill on its rails. Its extremely important to level the rails each time the mill is relocated.
![1020-9](https://timbertechnologies.com/wp-content/uploads/2024/04/1020-9.png)
Q11.
What models do you have?
1020 Ultra Body
1020 Super
816 Ultra
816 Standard
1020 Super
816 Ultra
816 Standard
Q13.
Do you offer on site training?
Yes. We provide free training at our production facility in Lac La Hache by appointment. We have additional training resources available in our private owners group online.
We’re also proud of our active online community of owners.
Q15.
How long have you been in business ?
40+ Years
![homesecreen-header-02](https://timbertechnologies.com/wp-content/uploads/2023/10/homesecreen-header-02.png)
Q17.
What type of blades are available?
Carbide tipped and inserted. The Carbide tipped is all one piece. The inserted blade has replaceable teeth and shanks.
Q19.
Which blade is better?
It’s based on personal preference.
Inserted blades allow for a quick tooth change in case of damage, but the blade is a higher cost.
Inserted blades are great for remote locations and you don’t have to remove the blade to replace the teeth. vs.
It’s based on personal preference. Inserted blades allow for a quick tooth change in case of damage.
The blade does not need to be removed from the machine to change the teeth.
However, the Inserted blade does have a higher initial cost.
Inserted blades are also great for remote locations if you don’t know how to solder your own teeth, or have a saw-doctor close by.
Q21.
How big of a log can I cut?
1020 Ultra Body Max Log Diameter: 65″
1020 Super Pro Max Log Diameter: 48″
816 Ultra Pro Max Log Diameter: 48”
816 Standard Log Diameter: 36”
1020 Super Pro Max Log Diameter: 48″
816 Ultra Pro Max Log Diameter: 48”
816 Standard Log Diameter: 36”
Q26.
Where do I get replacement teeth and shanks?
Online @ store.timbertechnologies.com/ or you can give us a call at the office – Monday to Friday 8:00am to 4:30pm PST
Q28.
Can I sharpen the blade right on the mill?
Yes, with the supplied jig.
Q30.
How long of a log can I cut?
The mill can cut tree length logs with the correct rail setup. Standard length available with the 816 is 14.5 ft. Standard length available with the 1020 is 20.5 ft.
Additional extensions are available at 7.5 ft lengths, you can add unlimited number extensions.
![CAR-09](https://timbertechnologies.com/wp-content/uploads/2023/11/CAR-09.png)
Q02.
Is the mill made in Canada?
Made in the Cariboo region of British Columbia , Canada.
![CAR-10](https://timbertechnologies.com/wp-content/uploads/2023/11/CAR-10.png)
Q04.
What is the radial multi catch?
It’s attachment that allows you to cut multiple preset angles, ranging between 0 & 180 degrees.
Q06.
What size of slabber is available?
Up to 36” Wide cut on the 816
Up to 48” Wide cut on the 816 Ultra + 1020
Up to 72” Wide cut on the 1020 Ultra
Up to 48” Wide cut on the 816 Ultra + 1020
Up to 72” Wide cut on the 1020 Ultra
Q08.
What attachments are available? (versatility for cutting)
Planer Blade, Slabber, Orbital Sander, Router + Drill Bit, Radial Multi Catch, Beveled Siding
![accessories-product-shots-3](https://timbertechnologies.com/wp-content/uploads/2024/06/accessories-product-shots-3.png)
Q10.
Do I have to assemble the mill?
The mill itself comes completely assembled. The Pull handle and the front guard have been removed for shipping. The rails, and transporter require assembly on-site. You’ll be up and cutting on the same day!
Q12.
Can I use my native status card?
Yes.
Q14.
What does the mill come with?
2 Carbide Tipped Blades
Standard Rail Package
Transporter
Sharpening Kit
Standard Rail Package
Transporter
Sharpening Kit
Q16.
Do I have to turn the log?
In most cases, you do not. The blade can swing 180 degrees to accomodate 90 degree and 180 degree cuts.
Q18.
What size are the blades?
25” Inch blade tip to tip, this fits on the 1020
21” Inch blade tip to tip, this fits on the 816
21” Inch blade tip to tip, this fits on the 816
Q20.
Where can I purchase blades?
Online @ store.timbertechnologies.com/ or you can give us a call at the office – Monday to Friday 8:00am to 4:30pm PST
![carbide-inserted-tipped-blade](https://timbertechnologies.com/wp-content/uploads/2024/06/carbide-inserted-tipped-blade.png)
Q22.
What is the Kerf size?
Kerf is 1/4″
Q23.
Does the mill come with a sharpener?
Yes, the mill comes complete with sharpener, jig, diamond wheel and case.
Q24.
What brand of engine comes with the mill?
Vanguard and Kohler based on availability.
Q25.
How deep can I cut?
1020 models can cut up to 10” and the 816 models can cut up to 8”
Q27.
Can I cut angles?
Yes. The radial multi catch allows you to cut a variety of angles. The radial multi catch is standard on the 1020 series and an optional upgrade on the 816 series.
Q29.
How big of a board can I cut?
1020 models can cut up to 10” by 20” boards
816 models can cut up to 8” by 16” boards
Larger boards, like table or counter tops can be cut with the optional slabber attachment.
816 models can cut up to 8” by 16” boards
Larger boards, like table or counter tops can be cut with the optional slabber attachment.
Couldn’t find the answer to your question?
Submit Your Question
Proudly Made in Canada 🍁
![quote-icon-e8e8e8](https://timbertechnologies.com/wp-content/uploads/2024/03/quote-icon-e8e8e8.png)
testimonial spotlight
Here’s what our customers are saying…
Jesse Abney
Visited Timber Technologies during a trip to Lac La Hache in 2021. Was impressed by the team’s capabilities and swing blade saw design, the founder’s story, and the tremendous thought put into almost ever facet of the operation. This firm is on its way to becoming one of the areas top employers, and one day will be a destination for other visitors wanting to learn more about this important Cariboo born company.
Nigel Williamson
These guys make a GREAT product!!! The SwingBlade technology is top notch. Customer experience was fantastic too. Would gladly recommend. Thanks Timber Technologies.
Keder Cord
Timber Technologies making a real Canadian product the real way in Canada! I ordered my saw just before the start of COVID . Delivery was as promised even in the midst of chaos of supply, labor and everything in general. At 68 and in business for 30 years I can honestly say these guys are one of the best suppliers.
Ken Worsnop
Its been a great experience working with Timber Technologies, they have been responsive and very helpful with all of my inquiries. I have zero regrets buying their 1020 Swing blade, its fast and effective.
David Wells
Timber Technologies builds a high quality sawmill that produces very accurate material we also have the slabber attachment the planer head and the sanding attachment and they also perform very well, the owner of the company Lindsey has been over backwards and went above and beyond to ensure we were completely satisfied, anytime I have any questions or concerns I can contact him directly and it is 99% of the time less than 1 minute.
Lynn Havens
I’ve been running my 1020 Super Pro for a year, and it has been a very reliable and productive mill. Customer service has been prompt and satisfactory. I run the mill just about every day sawing everything from pine and poplar to red oak and white oak, and the accuracy is as good or better than the bandsaw lumber I have seen.
![Google-Review-Logo-500px](https://timbertechnologies.com/wp-content/uploads/2024/03/Google-Review-Logo-500px.png)
Click to Learn More
Click to Learn More
Click to Learn More
Click to Learn More
Sign Up for Our Free Newsletter
![](https://timbertechnologies.com/wp-content/uploads/2023/11/CAR-02.png)
![](https://timbertechnologies.com/wp-content/uploads/2023/11/CAR-03.png)
![](https://timbertechnologies.com/wp-content/uploads/2023/11/CAR-04.png)
![](https://timbertechnologies.com/wp-content/uploads/2023/11/CAR-09.png)
![](https://timbertechnologies.com/wp-content/uploads/2023/11/CAR-10.png)
![](https://timbertechnologies.com/wp-content/uploads/2023/11/CAR-11.png)
![](https://timbertechnologies.com/wp-content/uploads/2023/11/CAR-19.png)